Four wheel drive systems operate with the help of a transfer case, a type of gearbox that is usually located behind the transmission. The purpose of the transfer case is to help the vehicle apply the correct amount of torque required by the driver. In 4WD and all wheel drive vehicles, the transfer case uses gears (and often a chain if the vehicle is a modern make or model) to help the vehicle enter into or maintain four wheel drive. All transfer cases also use a lubricant to keep the gears operating correctly. Because transfer cases play a key role in the performance of a 4WD vehicle, we advise our customers to watch over and repair their respective transfer cases when needed. Depending on the vehicle, recommended transfer case inspection intervals will vary. As such, drivers should look to their owner’s manuals and vehicle manufacturers for recommendations.
If you are experiencing problems with your transfer case, bring your 4WD vehicle into our shop and allow our service staff to have a look. Are you experiencing grinding noises, lubrication leaks, or some other problem? Our staff has the right tools to inspect your transfer case, and we will work hard to repair or replace your transfer case so your 4WD vehicle performs optimally. During our service, we can also check if your lubricant is dirty, and drain and replace the fluid for you. Be sure to keep up with service intervals for basic transfer case maintenance. But the next time you experience a problem, just give us a call or visit to see if our transfer case repair service is right for your situation. We look forward to getting your 4WD vehicle working correctly again.
We proudly service the Transfer Case Repair needs of customers in British Columbia, Canada, Vancouver, Coast and Mountains, and surrounding areas.
Areas Served :
British Columbia | Burnaby BC | Canada | Chilliwack BC | Delta BC | Kamloops BC | Ladysmith BC | Langley BC | Maple Ridge BC | Nanaimo BC | Port Coquitlam BC | Powell River BC | Prince George BC | Richmond BC | Surrey BC | Vancouver BC | Vancouver Coast and Mountains | Vernon BC | Victoria BC | West Vancouver BC | Westbank BC | and surrounding areas
Big-O Tire offers the following Services at select dealerships throughout BC, including:
What’s the difference between Repairs and Maintenance?
Repairs are services that are required or necessary when something on your vehicle is not working properly or may have worn to the point where a replacement is required to maintain the performance of your vehicle.
Maintenance is the routinely scheduled services, inspections and part replacements that your vehicle manufacturer recommends based on the age or mileage of your vehicle.
The schedule for performing these maintenance services varies from vehicle to vehicle. You will find the schedule for your vehicle in your owner's manual. Following this schedule is the best way to make sure your vehicle is performing as it should.
All BIG O Tire dealers in BC pride themselves on being able to provide the best customer service and the highest quality service work available anywhere. To support that, a service warranty on workmanship, service and/or parts is provided by each independent BIG O Tires dealership. These warranties vary from one aspect of our business to another - Tire warranties are different from Wheel warranties, and each of these differ from warranties on Service work performed during the course of a repair or maintenance on your vehicle. Ask your BIG O dealer at the time of purchase of these products and/or services what the warranty period is and what is covered under it.